Published
1) what is the standard nurse: patient ratio in your ER?
We don't have a standard nurse to patient ratio, because it really depends on what time of day it is- how many nurses are on shift and how many patients are in the department. Our max number of nurses is 3, our minimum is 1.
2) what is the standard tech : patient ratio in your ER?
We don't have techs.
3) does your hospital have a trauma designation? If so, what level?
Level 4.
4) how many beds does your ER have?
Six.
5) does your ED have a SANE program or have SANEs on staff?
We call in the SANE nurse as needed.
6)what's the name of your hospital, or at least what city is it located in?
Not telling!
1) what is the standard nurse: patient ratio in your ER?
This varies widely depending on acuity. If you have an ICU pt you are typically a 1:1 or 1:2. If you have general ESI 2's and 3's then you typically have a 1:3 or 1:4 assignment. I have gone up to 1:5 three or four times and have never had more than that
2) what is the standard tech : patient ratio in your ER?
We only have one tech for the whole ER so they do not take an assignment. Rather they float around and help where needed
3) does your hospital have a trauma designation? If so, what level?
Nope, not a trauma center
4) how many beds does your ER have?
16
5) does your ED have a SANE program or have SANEs on staff?
No, because there is another hospital nearby that does.
6)what's the name of your hospital, or at least what city is it located in?
Not telling. Will say it is not Texas, since that is what the OP was asking about
.....1) what is the standard nurse: patient ratio in your ER? 1:4 standard, 1:2 critical pts2) what is the standard tech : patient ratio in your ER?Generally, 1:12 but it's highly variable and time-of-day dependent
3) does your hospital have a trauma designation? If so, what level? Trauma 1
4) how many beds does your ER have? Approx 60
5) does your ED have a SANE program or have SANEs on staff? No... they go a clinic for SART exams
6)what's the name of your hospital, or at least what city is it located in? Do you want my name and phone number, too?
Our ratio depends on staffing but 99% of the time it's 1:4. Our techs do not have a set ratio as they help answer call lights and help with patient needs throughout the ER. If we have a patient that needs to be a 1:1 then they will be there. We always have a tech our in triage as well, and they primarily help bring patients back to their assigned room as well as help with VS.
We're a trauma level 4 hospital.
38 beds.
We do not have SANES on staff or a SANE program.
I'm not going to disclose the name/city of the hospital I work in, but I will say that I work in Texas which is just what you're looking for, right?
1) what is the standard nurse: patient ratio in your ER? 4:1 max, usually 3:1
2) what is the standard tech : patient ratio in your ER? It depends, we seem chronically short staffed with techs, ideally we have one tech for 12 rooms and one at triage
3) does your hospital have a trauma designation? If so, what level? Level I
4) how many beds does your ER have? 68
5) does your ED have a SANE program or have SANEs on staff? Yes, on call 24/7 and a SANE Program
6)what's the name of your hospital, or at least what city is it located in? I'm in the Midwest,..not Texas
godbless-yute
135 Posts
Hi all,
I trying to do my research mainly regarding staffing in TEXAS hospitals. I'm an ER nurse, but I'd still like to hear from you if ur in another specialty. Here goes a couple of questions:
1) what is the standard nurse: patient ratio in your ER?
2) what is the standard tech : patient ratio in your ER?
3) does your hospital have a trauma designation? If so, what level?
4) how many beds does your ER have?
5) does your ED have a SANE program or have SANEs on staff?
6)what's the name of your hospital, or at least what city is it located in?
thanks for your time