What brand of bed does your hospital use?

Nurses General Nursing

Published

I'm curious about what kind of beds your hospital uses, and what you like or don't like about them. I'm asking specifically for Hospital beds, since LTC usually uses much different beds. Also, please say if this is a critical care or med-surg bed, since the features are much different.

My facility currently uses the Hil-Rom beds, and I'm in critical care, so we have their Sport beds. I don't like them too much, and we are currently looking at different beds. I've seen demos of Hill-Rom's newest bed, Stryker, and Linet's beds. So far, I like Stryker's bed the most. I like the talking feature to it. If it senses a patient trying to get out of bed, it has a soothing female voice that tells the patient to lay back down. It also has 64 different commands and Yes/No questions, in 12 different languages, which can be helpful for basic translation needs. And since it has speakers, it has a built in music therapy library to play for the patient. Oh, and it looks like the power drive function works much better then Hill-Rom's. I don't think I really saw anything on the bed that I didn't like. And one of the best features, the percussion/vibration software is in every bed, not an expensive add-on module like Hill-Rom.

Linet's bed is just cheap. They even said that it is marketed towards smaller hospitals with small ICU's, that can't afford such an expensive bed like Hill-Rom and Stryker. I like that the turn assist and rotation therapy tilts the entire bed. It doesn't turn by inflating air bladders on one side, and deflating on the other side. BUT, it isn't an air mattress on the bed. So no percussion/vibration therapy available, and I wonder what that does for skin integrity. And the bed has no power drive function. Nobody on here may of heard of this brand, because they are new to the US, but apparently well known in europe.

So what is your favorite, and why? Or why isn't a brand your favorite? Thanks!

Specializes in LPN.

We have World War One Beds, with cranks. If they break down, they go over to Europe and get ones that the B Plague people slept in.

You all should check out CHG Spirit Select Bed. The have beds that go very low to the floor, also the whole bed is anti microbial. The bed exit alarms can be customized and actually could self reset itself. I have tried both Hill rom and Stryker, their beds are nice but the CHG hospital beds are truly fantastic! Check them out http://www.chgbeds.com

We have had Stryker beds for many years in our hospital in Glens Falls. We purchased Linet beds for a new unit a couple years ago because the cost was low. It was a mistake. The beds were broken continuously and our staff and patients complained about comfort and complexity of using the beds. The turn feature was rarely used as it was was unsafe for staff and patients. Our falls and HAPU were higher than other units. We recently purchased Stryker beds to replace the Linet beds. I love these new beds, and so does the rest of the staff. We have a gel mattress and our patients are very comfortable. We have the talking beds in our ICU as well. I do not use them, but my friends that do have great things to say. I would recommend Stryker beds.

CHG Hospital beds were bought by Stryker a few years ago. I thought I would pass along links of the various bed manufacturers some of which I mentioned. From my bed experience that you may gain some cost avoidance by having different equipment standards in the various segments of the hospital, ICU, Medsurg, Psych, etc. rather than one bed fits all standard.

•Amico - Beds | Amico

•Hill-Rom - Progressa® bed system | hill-rom.com

•Linette America - Beds | LINET

•Sizewise Medsurg beds - Sizewise - Hospital Beds and Bed Frames for Bariatric Patients | Sizewise

•Stryker Medical - Medical / Surgical Beds

-

S3

: Stryker

•Umano Beds: Umano Medical - ooksnow

Specializes in NICU.

When I worked in adults we had old-a** beds from the 1970s...it was a mix between *really* old ones with a crank at the end to raise the head, or a really old mechanical one. To tell you how old they were, each bed had a sticker that said "THIS ITEM IS Y2K READY" on it. That still kills me. I only left adults 6 months ago and we still had them so I know they're still in use now. Now I work in the NICU and we use old a** isolettes and cots from probably the 1980s, except we got funding for three fancy schmancy giraffes that have computer screens on them....but only three.

Ah...Canadian publically funded healthcare. It's great, but that means never any funding for new equipment. Most of the unit telephones in the NICU are old rotary dial phones attached to the wall in each pod. At least I get a bit of nostalgia whenever I work :roflmao:

Primary concern is the possibility of skin tears on geriatric patients from friction of non-air mattresses. Secondary concern is: their beds assist with pulmonary toileting which Linet beds seem to have overlooked.

In practical terms, these beds are quite complex. Linet does not appear to be large enough to provide timely support when they go down. They've only been here a few years.

Have had outstanding results with both Stryker and Hillrom, American companies. Linet is a foreign company based in the Czech Republic, so there's that.

Specializes in Multi-Specialist Assistant.

We purchased more than 100 linet beds. The quality is atrocious. The 5th wheel doesn't work on the majority of them. This requires at least 2 people to transport patients. The beds are less than 3 years old and most of the batteries do not hold a charge. When moving a patient unable to raise or lower any part due to no power. Consistently not working properly. They take an extended period of time prior to responding to electronic controls. Bed alarms are also a chronic issue increasing the number of falls on units. The only feature that is positive is the hurcules that pulls the patient up in bed. Not allowed in the ICU's because of lines tangling in the Hercules feature. The constant repair cost average $500 per repair which is frequent. 

This past week the Linet beds were no longer allowed to be used to  transport a patient in. This was because of chronic FAILURES... Per our management team and engineering department. The cost of repairing the chronic repairs was ridiculous... 

+ Add a Comment