CHovs
New Members
-
Joined
-
Last visited
All Content by CHovs
-
Hi all, is anyone ableto explain to me why low serum albumin levels can cause preclampsia? I'm totally stuck (somewhat) but can't manage to think my way through it. Thanks !!
-
As for the plunger you do not. The Plunger has a flat black rubber top to it that blocks any medication from leaking out of the barrel. Going back to the 3 cc example, say you had your 3 cc prepped in the syringe. Your plunger would be pulled back enough so that the black part is flush with the 3 cc line. When you go into the patient's room you can set the syringe down on the bedside table. You should take caution when drawing up the medication and when injecting that you only touch the top of the plunger (aseptic technique). Sterile technique is not broken though if you lay it down. If you think about it, You've already touched it with non-sterile hands. It's impossible to keep the plunger "sterile"; you can only keep it clean by using caution with handling the syringe.
-
When we were learning how to prepare IM medications, we were taught to use a blunt needle to draw up our medications then change the needle prior to administration. For example: You have to draw up 3 cc of medication from a vial. You would attach a blunt needle to a syringe. Inject your 3 cc of air, then withdraw your 3 cc of medication. Once you've done this, pull back on the plunger enough to take all the medication out of the blunt needle. Here you would use your scoop method to recap your needle. Once done, twist it off and apply your 22 or 23 gauge needle you'll use for injection. Leave the cap on. Once you go into the patient's room and do all of your checks, you will swab your injection site then uncap your needle to give the injection. Otherwise your needle should be capped from preparation untill injection. Hope this helps you out !
-