Easy (Hard?) Math Question

Drop factor is 10gtt/min, so every 10 drips equals 1ml. You are running 25gtt or 2.5ml/minute. 2.5 X 60 = 150ml/hr

If you have 1000ml, how long will it take to complete the entire bag? So, 1000ml/150ml/hr = 6.7 hours or 400 minutes.

Drop factor is 10gtt/min, so every 10 drips equals 1ml. You are running 25gtt or 2.5ml/minute. 2.5 X 60 = 150ml/hr

If you have 1000ml, how long will it take to complete the entire bag? So, 1000ml/150ml/hr = 6.7 hours or 400 minutes.

When in my schooling did I fail to learn that drop factor = mL?? So if it is 15gtt/min does that equal 15 drips equaling 1mL?? Is it interchangeable with the both macro and micro?

I came up w/the same answer, but used a completely different formula. I wonder if it is just a coincidence???

Okay, so what abt this one:

An IV of 500mL is to run at 40gtt/min using a 10 gtt/mL set. What is the infusion time?

Doing it the way I did it before my answer would be: 125 minutes (2hrs and 5mins). Is that the same answer if you do it your way?

Thanks for your help!!!

15 gtt/min does NOT equal mLs. gtt/min is the rate of the infusion. The drop factor of the tubing tells you how many drops equal one mL. The units for drop factor are gtt/mL and I think you transcribed it wrong in your post. Macrodrip tubing can have a many different drip factors. 15 is usually standard, but it can also be 10, 20, 25, etc. Microdrip tubing always has a drop factor of 60 gtt/mL.

Yes, both formulas get the same answer. Think of it this way:

Total volume / (rate/drop factor) = infusion time

Your first step is to find out how many mLs you are infusing per minute. Do this by dividing the rate of the infusion byt the drop factor of the tubing. Then find out how long it will take to infuse the entire volume by dividing the total volume in the bag by the number of mLs that are infused per minute.

I think there's a typo because the drip factor is a measure of how big are the drops... that is, how many drops make up one mL.

If it takes 10 drops to make 1 mL (10 gtt/mL) then it means that each drop has a volume of 0.1 mL (1 mL/10 gtt = 0.1 mL/gtt).

At the given rate (25 gtt/min) it means that 2.5 mL infuses over one minute (25 gtt/min x 0.1 mL/gtt = 2.5 mL/min) OR (25 gtt/min x [1 mL/10 gtt] = 2.5 mL/min).

At that very slow rate, it'll take a long time for the bag to empty. Specifically, (1,000 mL x [1 min/2.5 mL] = 400 minutes)

When in my schooling did I fail to learn that drop factor = mL??

- It doesn't. The drop factor defines the size of each drop (that is, how many drops make up 1 mL).

So if it is 15gtt/min does that equal 15 drips equaling 1mL??

Again, I think there's either a typo or you're misreading it: 15 gtt/min means just that... 15 drops in one minute. The drip factor is gtt/mL, not gtt/min... it's a function of the tubing and the tubing only...

The rate (as in "per minute") is a function of the height of the bag, the size of the angiocath, the size and quality of the vein, the site of the IV, and the positioning of the roller clamp or setting on the flow restrictor.

You really need to try to wrap your head around this.

Is it interchangeable with the both macro and micro?

No... no.

I came up w/the same answer, but used a completely different formula. I wonder if it is just a coincidence???

Show your work for feedback if you want.

I am sorry if I confused you. When I do these calculations, I have my own method in mind. I need to remember that there is a formula that you are required to follow. I think so as long as we get the same answers, it is okay. I wasn’t trying to “show” you a different way, I was simply confirming that the answer you received is correct.

You need to know your drip chamber factors it can make a difference. 10,15,60 drips a ml so if you know your chamber and how drips a minute you figure how many gtts or minutes for any bag.

"i have honestly never had a problem that had me calculate to find the overall infusion time (we normally are looking for the drop factor), so i am really confused."

now i'm the confused one. you ought never to be asked to calculate drop factor (which as all the above folks have mentioned, is not gtt/minute but gtt/cc), because that's a function of the iv tubing, it's written on the package, and you can't do anything to change it .

(btw, "drop factor" does not equal "drip rate," which is where your misconception originates, i think. glad we cleared that up for ya!)

you will always be asked to calculate how long a bag ought to last (so you can eyeball it and have a reasonable idea of when to plan to hang the next one), how many cc/hour (so you can set the pump properly or put those little lines on the bag in magic marker-- antiquated, but still possible), or gtts/minute.

those you can (and must) set accurately to match the medical plan of care as written.