Mr. Green

Its not compatible with NS You need also to flush the line with D5w before and after oxaliplatin infusion.

thank you for your post no reason, when i am ask them, they said there is a different protocol references and the concentration should be between 1mg - 4mg /ml for the calculation i am using this formula ( dose rate X total volume) =rate ml/hr rituximab dose for the example up this is the answer: 50mg x 560ml = 37.3 ml/hr for 30 minutes 750mg increase the rate to 100mg if no reaction 100mgX560ml = 74.6ml /hr 750mg and you will continue increasing rate until 400mg/hr this is the maximum rate. The 90-minute RITUXAN infusion in cycle 2 -6 20% of the total dose over the first 30 minutes 350ml _ 20% = 70ml you will give it over 30 minutes the rate should be 140ml/hr 80% of the total dose over the following 60 minutes 350ml _ 80% = 280 ml the rate over 60 minutes is 280ml/hr i need some one to confirm if this is right calculation !!!!

Hi, i want to ask about rituximab initial dose (infusion rate calculation). for example: BSA:2.0 M2 Rituximab: 375mg/m2 = 750 mg total volume: 560 ml drug concentration : 1.33mg/ml i am gonging to start with 50mg /hr please let me know the correct calculation ? The 90-minute RITUXAN infusion rate : Rituximab 500mg/m2 =1000mg Total volume : 350ml [*=left]20% of the total dose over the first 30 minutes [*=left]80% of the total dose over the following 60 minutes [*=left]how i can calculate it? [*=left]Thank you for every one :)